Tips for a successful search

Using specific industry keywords and phrases will generate the best results for your search. Generic terms like asphalt, building materials, chemicals, etc. will generate a large number of results.
If you are searching to see if we perform a specific Test Method or Specification, use the  Product Testing Index. 
Call us anytime 813-621-5777
Validated Products
Attributes
  • Listee
    • Owens Corning
  • Manufacturer Location
    • Kearny, NJ
    • Medina, OH
    • Minneapolis, MN
    • Portland, OR
  • Category
    • Roofing Material
  • SubCategory
    • Asphalt Shingle
  • Standing
    • Good
  • Certification(s)
    • ANSI FM 4473 Class 3 (exclude Minneapolis
    • MN)
    • ASTM D3462
    • ASTM D3161 Class F
    • ASTM D7158 Class H
    • ASTM E108 Class A
    • CSA A123.5
    • ICC-ES AC438
    • UL 2218 Class 3 (exclude Minneapolis
    • MN)
Documents

TruDefinition Duration (Canada)

TruDefinition Duration (Canada) is a self-sealing laminated asphalt shingle. Shingles are manufactured with 2 layers of fiberglass mat coated with asphalt on both sides, and surfaced on the weather-exposed side with mineral granules. Shingles have approximate dimensions of 39-3/8in x 13-1/4in.

Ratings

ANSI FM 4473 (Impact)
Product has met Class 3 requirements of ANSI FM 4473 when installed over minimum 15/32in thick APA-rated plywood decks.

ASTM D3462
Product has met specification requirements of ASTM D3462.

ASTM D3161 (Wind)
Product has met Class F - 110mph (177km/h) requirements of ASTM D3161.

ASTM D7158 (Wind)
Product has met Class H – 190mph (306km/h) requirements of ASTM D7158.

ASTM E108 (Fire)
Product has met Class A requirements of ASTM E108 when installed over minimum 3/8in thick APA-rated plywood decks with minimum single-layer of ASTM D226 Type I, ASTM D4869 Type I, or ASTM D6757 underlayment or other underlayment that is listed for use with Class A asphalt shingle. Slope is unlimited.

CSA A123.5
Product has met specification requirements of CSA A123.5.

ICC-ES AC438
Product has met Table 1 (Physical Requirements) and Table 2 (Additional Requirements) of ICC-ES AC438.

UL 2218
Product has met Class 3 requirements of UL 2218 when installed over minimum 15/32in thick APA-rated plywood decks.